SAS-U030000 - Internal Control Module Software Incompatibility. General Failure Information. No sub type information
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
13 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (14)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2007–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2015
- Volvo XC60 (2009–)2009–2015
- Volvo XC70 (2008–)2008–2015
Hva betyr feilkoden?
This code means the sensor's software does not match the car, because the configuration IDs differ. The sensor checks its ID against the signal setup that the central electronic module (CEM) sends on the CAN network. When the code is set, the sensor answers diagnostic commands, but ordinary CAN communication does not work.
Mulige årsaker
- Incorrect configuration ID, because the unit is not intended for this car, for example a used unit with different software or hardware.
- Incorrect software version.
Hva du kan gjøre
- 1Check that the steering wheel module or angle sensor is intended for your car.
- 2If someone has replaced the part without loading new software, that may be the cause. Ask a workshop to check this.
- 3Have a workshop read the fault codes and load the latest software into the control module.
- 4The angle sensor is part of the steering and stability system. Have a workshop carry out the fault tracing rather than working on the steering wheel yourself.
Symptomer du kan merke4
- The information lamp lights up
- The anti-spin warning lamp lights up
- The traction, stability and Four-C functions do not work
- A yellow warning symbol and text message show in the display
Hva feilen kan påvirke1
- The sensor cannot communicate normally on the CAN network
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.