Hva betyr feilkode SAS-U210100?

Diagnose og feilkodedefinisjon for SAS-U210100 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C70 (2006–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

SAS-U210100 - Control Module Configuration Incompatible. General Failure Information. No sub type information

System

Rattvinkelsensor (SAS)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (8)

Hva betyr feilkoden?

This code means the steering angle sensor's configuration does not suit the car. It checks its configuration ID against the signal setup that the central electronic module (CEM) sends on the CAN network, and the code is set when the IDs disagree. The sensor then answers diagnostic commands, but ordinary CAN communication does not work.

Mulige årsaker

Wrong configuration ID because the unit is not intended for this car, for example a used unit with different software or hardware.
Incorrect software version.

Hva du kan gjøre

1If the angle sensor is used or taken from another car, it is probably not intended for yours.
2Check that the fuses are intact. Their location is shown in the owner's manual or on the fuse box cover.
3Have a workshop read the fault codes, check the configuration and load new software if needed.
4The angle sensor is part of the steering and stability system. Have a workshop carry out the check rather than working on the steering wheel yourself.

Symptomer du kan merke4

A yellow warning symbol and text message show in the display
The anti-spin and anti-skid warning lamp lights up or behaves abnormally
The anti-spin function does not work
The stability function does not work

Hva feilen kan påvirke1

The sensor cannot communicate normally on the CAN network

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.