Hva betyr feilkode SAS-U210195?

Diagnose og feilkodedefinisjon for SAS-U210195 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C70 (2006–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

SAS-U210195 - Control Module Configuration Incompatible. Component Failures. Incorrect assembly

System

Rattvinkelsensor (SAS)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (8)

Hva betyr feilkoden?

This code means the buttons in the steering wheel or other components do not match the car's equipment. The sensor compares its configuration with the one that the central electronic module (CEM) sends. The code can be set, for example, when there are rear wiper buttons in a car without a rear wiper, or when a button is pressed that should not be fitted to that car.

Mulige årsaker

Wrong variant of component fitted.
Component fitted incorrectly.

Hva du kan gjøre

1Check that the buttons on the steering wheel suit the car's equipment, such as cruise control, rain sensor and rear wiper.
2If you have pressed a button that should not be fitted to your car, the code may be set.
3Have a workshop read the fault codes and check the configuration of the angle sensor and the steering wheel components.
4The angle sensor is part of the steering and stability system. Have a workshop carry out the check rather than working on the steering wheel yourself.

Symptomer du kan merke4

A yellow warning symbol and text message show in the display
The anti-spin and anti-skid warning lamp lights up or behaves abnormally
The anti-spin function does not work
The stability function does not work

Hva feilen kan påvirke1

The sensor cannot communicate normally on the CAN network

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.