VOLVO
SAS-U30001D - Control Module. General Electrical Failures. Circuit current out of range
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The steering angle sensor reads a code wheel with optical sensors, and the code is set when the current in one of its digital sensors is out of range. The fault is caused by a damaged steering angle sensor.
Mulige årsaker
- Damaged steering angle sensor.
Hva du kan gjøre
- 1With the engine running, turn the wheel fully right and then fully left, and see whether the code is still stored.
- 2With a diagnostic tool, read the counters for the code. Many incorrect drive cycles point to a recurring fault.
- 3The sensor is mounted beneath the contact reel and is changed along with it. Have a workshop carry out the replacement.
- 4If the code returns after that, have a workshop replace the steering wheel module (SWM).
- 5The angle sensor is part of the steering and stability system. Have a workshop diagnose and replace it rather than working on the wheel yourself.
Symptomer du kan merke5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Hva feilen kan påvirke1
- The sensor warns the other control modules that the data it sends is wrong
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.