VOLVO
SAS-U300044 - Control Module. System Internal Failures. Data memory failure
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The steering angle sensor has registered a fault in its internal memory. The fault is caused by a damaged sensor.
Mulige årsaker
- Damaged steering angle sensor.
Hva du kan gjøre
- 1With the engine running, check whether the code is still stored after the wheel has been turned fully one way and then the other.
- 2With a diagnostic tool, read the counters and see whether the fault occurs often or rarely.
- 3If the fault returns often, have a workshop replace the contact reel or angle sensor. If the code comes back after that, the steering wheel module (SWM) must be replaced.
- 4The angle sensor is part of the steering and stability system. Have a workshop diagnose and replace it rather than working on the steering wheel yourself.
Symptomer du kan merke5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Hva feilen kan påvirke1
- The sensor warns the other control modules that the data it sends is wrong
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.