VOLVO
SAS-U300061 - Control Module. Algorithm Based Failures. Signal calculation failure
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The steering angle sensor reads a code wheel with optical sensors, and the signals read should form a specific pattern. The code is set when the pattern does not match, which is caused by a damaged steering angle sensor.
Mulige årsaker
- Damaged steering angle sensor.
Hva du kan gjøre
- 1With the engine running, turn the wheel fully right and then fully left, and see whether the code is still stored.
- 2With a diagnostic tool, read the counters for the code and check how often the fault occurs.
- 3Have a workshop replace the contact reel or angle sensor if the code returns, and the steering wheel module if it continues.
- 4The angle sensor is part of the steering and stability system. Have a workshop carry out the repair rather than working on the wheel yourself.
Symptomer du kan merke5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Hva feilen kan påvirke1
- The sensor warns the other control modules that the data it sends is wrong
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.