VOLVO
SAS-U300062 - Control Module. System Internal Failures. Internal electronic failure
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The two processors in the steering angle sensor receive information from the sensor, perform calculations and compare the results. The code is set when the information does not agree, which is caused by an internal fault in the sensor.
Mulige årsaker
- Internal malfunction within the steering angle sensor (SAS).
Hva du kan gjøre
- 1Switch off the ignition, restart the engine and turn the wheel fully right and then fully left. Check whether the code is still stored.
- 2With a diagnostic tool, read the counters for the code. Many incorrect drive cycles point to a recurring fault.
- 3If the code returns, have a workshop replace the steering wheel module (SWM).
- 4The angle sensor is part of the stability system. Have a workshop diagnose and replace it rather than working on the steering wheel yourself.
Symptomer du kan merke5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Hva feilen kan påvirke1
- The sensor warns the other control modules that the data it sends is wrong
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.