VOLVO
SAS-U300087 - Control Module. Bus Signal / Message Failures. Missing message
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The sensor gets word from the central electronic module (CEM) on the ignition key position. The code is set when that information is missing or wrong for longer than a threshold. The cause then lies in the CEM, and fault tracing continues there.
Mulige årsaker
- Key-position data sent by the CEM is absent or incorrect.
- The cause of the fault is in the central electronic module (CEM).
Hva du kan gjøre
- 1If the code was set while the key was removed, it can be ignored.
- 2With a diagnostic tool, read the stored values from when the code was set, and read the fault codes in the CEM.
- 3Have a workshop fault-trace the central electronic module (CEM), since fault tracing continues there.
- 4The angle sensor is part of the stability system. Have a workshop do the fault tracing rather than working on the steering wheel yourself.
Symptomer du kan merke5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Hva feilen kan påvirke1
- The sensor warns the other control modules that the data it sends is wrong
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.