VOLVO
SAS-U300096 - Control Module. Component Failures. Component internal failure
System
Rattvinkelsensor (SAS)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (8)
- Volvo C30 (2007–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Kun motor: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Kun motor: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The steering angle sensor checks its own internal components. The code is set when it detects that one of them is not working, which is caused by an internal fault in the sensor.
Mulige årsaker
- Internal malfunction within the steering angle sensor (SAS).
Hva du kan gjøre
- 1Switch off the ignition, wait a while and start the engine. Check whether the code is still stored, clear it and test drive the car.
- 2If the fault is permanent, the steering angle sensor must be replaced. A workshop does this.
- 3The angle sensor is part of the anti-spin and stability system. Have a workshop diagnose and replace it rather than working on the steering wheel yourself.
Symptomer du kan merke4
- A yellow warning symbol and text message show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin function does not work
- The stability function does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.