VOLVO
SODL-U003748 - Vehicle Communication Bus B. System Internal Failures. Supervision software failure
System
Blindsone-sensor V (SODL)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
6 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–)
Hva betyr feilkoden?
Although the code is named a fault in the supervision software, it applies when the signal configuration file is missing or wrong. The control modules in the car send and receive information on the CAN network all the time. The cause may be loose connections, contact resistance or oxidation at the connections, or an open circuit in the CAN wiring to the CEM.
Mulige årsaker
- Loose connections, contact resistance or oxidation at the connections.
- Open circuit in the CAN wiring running to the CEM.
Hva du kan gjøre
- 1Check that the connections in the extended CAN network are firmly seated and not corroded.
- 2With a diagnostic tool, read the fault codes in the CEM and see whether more control modules show communication faults.
- 3Have a workshop measure the CAN wiring to the CEM, since this needs measuring equipment.
Symptomer du kan merke3
- Blind-spot monitoring (BLIS) is not working
- Rear cross-traffic alert (CTA) is not working
- A yellow warning symbol and text message show in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.