VOLVO
SODL-U003788 - Vehicle Communication Bus B. Bus Signal / Message Failures. Bus off
System
Blindsone-sensor V (SODL)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
6 modellerS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), XC60 (2009–)
Hva betyr feilkoden?
The control module sends and receives information on the CAN network all the time. The code is set when messages passing between the module and the CEM are wrong. The cause may be loose connections, contact resistance or oxidation at the connections, or an open circuit in the CAN wiring between the control module and the CEM.
Mulige årsaker
- Loose connections, contact resistance or oxidation at the connections.
- Open circuit in the CAN wiring running to the CEM.
Hva du kan gjøre
- 1Check that the connections in the extended CAN network are firmly seated and not corroded.
- 2With a diagnostic tool, clear the fault codes in all control modules, let the car run for a while, then read the fault codes again.
- 3Have a workshop measure the voltage drop in the CAN wiring and look for short circuits, since this needs measuring equipment.
Symptomer du kan merke3
- Blind-spot monitoring (BLIS) is not working
- Rear cross-traffic alert (CTA) is not working
- A yellow warning symbol and text message show in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.