VOLVO
SRS-00E9 - Driver's seat belt (inertia) reel sensor. Communication fault
System
Kollisjonsputesystem (SRS)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C30 Electric (2011–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (4)
Hva betyr feilkoden?
The SRS control module has registered faulty communication on the signal line to the driver's seat belt reel sensor for a longer period. The reel sensor sits in the same unit as the belt tensioner, so the control module cannot read its signal and the SRS warning appears.
Mulige årsaker
- Broken wire or poor contact in the signal line or the plugs between the SRS module and the reel sensor
- Open circuit in the driver's seat belt reel sensor
- Damaged reel sensor, so communication with the control module fails
Hva du kan gjøre
- 1Read the fault code with diagnostic equipment and note whether it is permanent or intermittent
- 2Have a workshop check that the connector at the driver's seat belt reel sensor is secure and free from corrosion
- 3Have a workshop check chafing or pinch damage on the cable to the reel sensor
- 4Have a workshop check the signal cable to the SRS control module, as it is part of the airbag system
- 5If no fault is found, the reel sensor is what needs replacing; it sits in the same unit as the belt tensioner, so a workshop replaces both
- 6Do not work on the airbag system or the belt tensioner yourself; have a workshop check it
Symptomer du kan merke2
- The general warning lamp lights
- An SRS warning message is displayed
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.