VOLVO
SUM-0063 - Bodywork acceleration sensor, right front. Signal missing
System
Aktivt understell (SUM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Vis modeller per årsmodell og motor (7)
Hva betyr feilkoden?
No signal comes from the body acceleration sensor at the right front corner. It is one of three sensors that register the vertical movement of the body, so the suspension control module lacks that information.
Mulige årsaker
- Open circuit in the ground lead
- Open circuit in the signal cable
- The signal cable has contact with the power supply cable
- Poor contact in the connections
- Defective acceleration sensor
Hva du kan gjøre
- 1Use a multimeter to check that the ground and signal leads to the body sensor at the right front are intact
- 2Check the connectors at the sensor for loose, corroded or chafed wires
- 3If you have a diagnostic tool: read live data for the body sensor at the right front; if the value is missing, the signal is absent
- 4Check that the suspension system fuses are intact; the owner's manual shows where they are
- 5If the wiring is intact, the sensor is probably defective. Have a workshop replace it
Symptomer du kan merke3
- The general warning lamp lights
- Message in the display
- Four-C does not work
Hva feilen kan påvirke1
- Four-C control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.