VOLVO
SUM-0092 - Supply, sensor. Signal too high
System
Aktivt understell (SUM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Vis modeller per årsmodell og motor (7)
Hva betyr feilkoden?
The supply voltage to the position sensor at the left rear wheel is too high. The supply comes from the suspension control module, and the fault may be in the wire, the sensor or the control module.
Mulige årsaker
- The supply wire to the sensor has contact with positive voltage
- Open circuit in the signal cable from the sensor
- Defective position sensor
- Defective control module
Hva du kan gjøre
- 1Read out the fault codes first. Any code for the left rear position sensor must be repaired and cleared before you continue
- 2Check that the connections at the position sensor and at the control module are not oxidised
- 3Use a multimeter to check that the signal cable from the position sensor at the left rear wheel is not broken
- 4If the wiring is intact, the position sensor or the control module is probably defective. Have a workshop check this
Symptomer du kan merke3
- The general warning lamp lights
- Message in the display
- Four-C does not work
Hva feilen kan påvirke1
- Four-C control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.