VOLVO
SUM-0203 - Control module
System
Aktivt understell (SUM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Vis modeller per årsmodell og motor (7)
Hva betyr feilkoden?
The suspension control module has registered a fault that may be caused by poor contact or oxidation in the connectors to the control module or to the Central electronic module (CEM). The fault may also be caused by an internal fault in the control module. The Four-C control is switched off.
Mulige årsaker
- Contact resistance or oxidation in the connectors to the suspension control module or the Central electronic module (CEM)
- Internal fault in the control module
Hva du kan gjøre
- 1Check that the connectors to the suspension control module and to the Central electronic module (CEM) are secure and not oxidised
- 2Have a workshop check the voltage to both control modules and the wiring to the CEM
- 3Clear the code and test-drive the car to see whether it returns
- 4Check that the suspension system fuses are intact; the owner's manual shows where they are
- 5If the fault remains, have a workshop replace the suspension control module and program it
Symptomer du kan merke3
- The general warning lamp lights
- Message in the display
- Four-C does not work
Hva feilen kan påvirke1
- The Four-C control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.