VOLVO
SUM-U030000 - Internal Control Module Software Incompatibility. General Failure Information. No sub type information
System
Aktivt understell (SUM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The SUM checks the configuration IDs on the network against the CEM's database. The fault code is set when the SUM finds that a configuration ID on the network is wrong.
Mulige årsaker
- Comparison fault in the signal database between the SUM and the CEM
- A fitted control module has the wrong configuration ID
- A control module has been replaced without new software being loaded into it
Hva du kan gjøre
- 1Has anything recently been replaced in the car, for example a control module? This code can be set if new software was not loaded into it
- 2Read the fault codes in all control modules; if communication faults are present in several, the CEM is the first to look at
- 3Examine the connectors and wiring in the CAN network for loose connections, chafing and pinch damage
- 4Have a workshop check the control module's configuration against the database in the CEM and load in new software if needed
Symptomer du kan merke2
- A message appears in the information display
- The Four-C function does not work
Hva feilen kan påvirke1
- The Four-C function is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.