VOLVO
SUM-U040168 - Invalid Data Received From Engine control module. Algorithm Based Failures. Event information
System
Aktivt understell (SUM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The SUM has received invalid or incorrect engine torque data from the engine control module (ECM) over the CAN network. The code is event-driven and is for information only. It does not indicate a fault in the SUM and does not need to be cleared; it disappears when the conditions no longer apply.
Mulige årsaker
- Fault in the engine control module (ECM)
- Fault in the CAN network
Hva du kan gjøre
- 1If you have a diagnostic tool, read the fault codes in the engine control module (ECM), since the incorrect data comes from there
- 2Deal with any fault codes in the engine control module first, then check whether this code is still present
- 3If there are also communication faults in the SUM, check the fault codes in the central electronic module (CEM)
- 4Inspect the connectors and wiring in the CAN network for loose connections, chafing and pinch damage
- 5If the code returns after faults in the ECM have been dealt with, have a workshop with diagnostic equipment trace the CAN network
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.