VOLVO
SUM-U041868 - Invalid Data Received From Brake Control Module. Algorithm Based Failures. Event information
System
Aktivt understell (SUM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Hva betyr feilkoden?
The SUM continuously gets yaw and sideways-acceleration data from the BCM over the CAN network, and here it has received invalid or incorrect values. The code is event-driven and indicates information rather than a fault in the SUM. It disappears when the conditions no longer apply.
Mulige årsaker
- Fault in the brake control module (BCM)
- Fault in the CAN network
Hva du kan gjøre
- 1If you have a diagnostic tool, read the fault codes in the brake control module (BCM), since it sends the incorrect data
- 2Deal with any fault codes in the brake control module first, then check whether this code is still present
- 3If there are also communication faults in the SUM, check the fault codes in the central electronic module (CEM)
- 4Inspect the connectors and wiring in the CAN network for loose connections, chafing and pinch damage
- 5The fault concerns the signals from the brake control module: have a workshop check the brake system and do not work on it yourself
Symptomer du kan merke2
- A message appears in the information display
- The Four-C function does not work
Hva feilen kan påvirke1
- The Four-C function is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.