VOLVO
SWM-000C - Windshield wiper lever. Invalid combination
System
Rattmodul (SWM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The steering wheel module (SWM) has registered that the single-wipe and low-speed wipe switches on the windscreen wiper stalk were activated at the same time for too long. The wipers then run only at low speed.
Mulige årsaker
- The single-wipe and low-speed wipe switches are activated at the same time
Hva du kan gjøre
- 1Check that the windscreen wiper stalk is not sticking or stuck in an activated position
- 2If you have a diagnostic tool, read the single-wipe and low-speed wipe switches in live data and check that they are not active at the same time
- 3If the stalk is free but the fault remains, have a workshop check the switch
Symptomer du kan merke1
- The wipers run only at low speed
Hva feilen kan påvirke1
- If the wipers are set to an active position, they run at the lowest speed
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.