VOLVO
SWM-0203 - Steering wheel angle sensor. Faulty signal
System
Rattmodul (SWM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The steering wheel angle sensor has registered that the steering wheel is turned faster than the permitted value. This can happen when the front wheels have hit a curb or a stone. The stability functions are switched off while the fault is present.
Mulige årsaker
- The front wheels have hit a curb or a stone
Hva du kan gjøre
- 1Stability control is switched off while the fault is present, so drive carefully until it has been repaired
- 2Read and note the code, clear it and road test to see whether it returns
- 3Check the front wheels and suspension for visible damage after the impact with the curb or stone
- 4If you have a diagnostic tool: turn the steering wheel slowly from lock to lock and check in live data that the angle changes smoothly
- 5If the fault returns, have a workshop replace the steering wheel module (SWM), since the angle sensor cannot be replaced separately
Symptomer du kan merke2
- Traction control warning lamp lit
- The stability control system does not function
Hva feilen kan påvirke1
- Active yaw control (AYC) is blocked
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.