VOLVO
SWM-0A08 - Reset button. No function
System
Rattmodul (SWM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Kun motor: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Kun motor: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Alle motorer unntatt: D4162T, D5204T, D5204T5
Hva betyr feilkoden?
The steering wheel module (SWM) has registered that the car has no trip computer, yet the menu selector and reset button for one are fitted. The cause is an incorrect control stalk fitted on the left-hand side, and cruise control then does not work at all.
Mulige årsaker
- Incorrect control stalk fitted on the left-hand side
Hva du kan gjøre
- 1Check whether the control stalk or keypad has been replaced recently and that it is intended for this car
- 2If you have a diagnostic tool: read the buttons in live data and check whether any shows active without being pressed
- 3Have a workshop check that the correct control stalk is fitted
Symptomer du kan merke2
- No function for the trip computer
- Cruise control does not work at all
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.