VOLVO
TCM-0015 - Lock-up solenoid SL. Hydraulic fault
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (1999–2006), XC90 (2003–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The control module checks whether lock-up solenoid SL is stuck open or closed by comparing the signals from the solenoid with pressure sensor PS4, which detects whether the solenoid is activated. If the signals do not match for a certain time, the fault code is set. The lock-up solenoid controls the lock-up function in the transmission.
Mulige årsaker
- Lock-up solenoid SL has stuck in the open or closed position
- Defective lock-up solenoid SL
Hva du kan gjøre
- 1Have a workshop check the transmission fluid for metal particles
- 2If you have a diagnostic tool: activate lock-up solenoid SL and listen for a click from the transmission
- 3If the solenoid does not click, this points to a mechanical fault; have a workshop replace lock-up solenoid SL
- 4Road test the car and listen for clear noises or malfunctions from the transmission
- 5Have a workshop check contact resistance and oxidation at the transmission and control module connectors; if the check shows a mechanical fault in the transmission, it must be replaced
Symptomer du kan merke3
- The automatic transmission warning lamp flashes
- No lock-up function
- The malfunction indicator lamp (MIL) is lit
Hva feilen kan påvirke1
- The control module does not switch the lock-up solenoid on
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.