VOLVO
TCM-003A - Gear-shift position sensor. Faulty signal
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
Hva betyr feilkoden?
The gear lever position (P, R, N or D) reaches the gear-shift position sensor, which is built into the transmission control module, through a cable. The sensor is of Hall type, and the control module has registered an incorrect signal from one of the Hall sensors.
Mulige årsaker
- The gear-shift position sensor is damaged
- The connector or cable is damaged
Hva du kan gjøre
- 1Have a workshop confirm that the gearshift cable is adjusted properly, and adjust it if needed
- 2If you have a diagnostic tool: compare the gear shown in live data with the position of the lever when you move it to P, R, N and D
- 3Clear the fault code and check whether it returns
- 4If the fault remains, have a workshop check the connector and wiring to the gear-shift position sensor, and replace the mechatronic unit if the sensor is at fault
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.