VOLVO
TCM-0041 - Control module temperature sensors. Faulty relation
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
Hva betyr feilkoden?
The transmission has two temperature sensors, one in the oil sump and one in the control module's processor. Their readings differ by more than is allowed, and the control module cannot tell which reading is wrong.
Mulige årsaker
- A temperature sensor is damaged
Hva du kan gjøre
- 1If you have a diagnostic tool: read both oil temperature sensors in live data, compare them with room temperature, and see which one is out of line
- 2After a test drive with gear changes, read both sensors again and check that they rise in step
- 3Have a workshop read out the extended fault code information to see more about the fault
- 4If the fault remains, have a workshop replace the mechatronic unit, which is needed if the sensor or the control module's processor is at fault
Symptomer du kan merke2
- Gear shifts may feel rough or jerky
- Gear changes take too long to complete
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.