VOLVO
TCM-0060 - Control unit. Internal fault
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
11 modellerC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S40 (1996–2004), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V40 (1996–2004), V70 (1997–2000), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (22)
- Volvo C70 Cabriolet (1998–2005)2000–2005Kun girkasse: AW55-50/51SN
- Volvo C70 Coupé (1998–2002)2000–2002Kun girkasse: AW55-50/51SN
- Volvo S40 (1996–2004)2001–2004
- Volvo S60 (2001–2009)2001–2002
- Volvo S60 (2001–2009)2003Alle girkasser unntatt: M58
- Volvo S60 (2001–2009)2004–2009Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo S70 (1997–2000)2000Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo S80 (1999–2006)1999–2004
- Volvo S80 (1999–2006)2005–2006Alle girkasser unntatt: M56
- Volvo V40 (1996–2004)2001–2004
- Volvo V70 (1997–2000)2000Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2000–2002
- Volvo V70 (2000–2008)2003Alle girkasser unntatt: M58
- Volvo V70 (2000–2008)2004–2007Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2008Kun girkasse: AW55-50/51SN
- Volvo V70 XC / XC70 (2001–2007)2001–2002
- Volvo V70 XC / XC70 (2001–2007)2003–2007Kun girkasse: AW50/51 AWD
- Volvo XC90 (2003–)2003, 2015
- Volvo XC90 (2003–)2004Alle girkasser unntatt: M66 AWD
- Volvo XC90 (2003–)2005–2006Alle girkasser unntatt: M66 AWD, TF-80SC AWD
- Volvo XC90 (2003–)2007Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo XC90 (2003–)2008–2014Kun girkasse: AW50/51 AWD
Hva betyr feilkoden?
The transmission control module drives the shift solenoids through its own power stages, which switch voltage to the solenoids when they are to be activated. The fault means the control module has an internal fault in the power stage for one of the solenoids S1 to S5.
Mulige årsaker
- Internal fault in the control module
Hva du kan gjøre
- 1Read off the fault code, clear it and road test the car to see whether it comes back
- 2Have diagnostic equipment? With the selector in P, activate S1 to S5 one by one; the status should toggle OFF and ON. If one does not, the control module is at fault
- 3If the control module is replaced it must be programmed by a workshop, as a new control module is supplied without software
Symptomer du kan merke5
- General orange warning lamp on
- Malfunction indicator lamp (MIL) on
- No lock-up function
- Harsh gear shifting
- No gear changes
Hva feilen kan påvirke2
- The control module stops activating all the solenoids, so no gear change can take place
- The Emergency mode III program is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.