VOLVO
TCM-0070 - Function, immobilizer. Signal missing
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (15)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo S60 (2001–2009)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Kun motor: D5244T5 · Kun girkasse: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5 · Alle girkasser unntatt: AW50/51 AWD
Hva betyr feilkoden?
The start inhibitor makes sure the engine can only be started with the gear selector in position P or N. The transmission control module sends a signal to the engine control module that tells it starting is allowed when the signal is grounded. The fault means the signal cannot be grounded, so the engine control module is not given permission to start the engine.
Mulige årsaker
- The signal cable is short-circuited to voltage
- Internal fault inside the transmission control unit (TCM)
Hva du kan gjøre
- 1Read off the fault code, clear it and check whether it comes back
- 2Have a diagnostic tool? Read the start inhibitor status with the brake pressed while moving the selector; it should show start permitted only in P and N
- 3Use a multimeter to check that the cable between the transmission control module and the engine control module has no short circuit to voltage
- 4Have a workshop check the connections and put right the fault as needed
Symptomer du kan merke1
- The engine does not start
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.