Hva betyr feilkode TCM-0072?

Diagnose og feilkodedefinisjon for TCM-0072 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C30 (2007–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-0072 - Start lock function. Signal too low

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (10)

Hva betyr feilkoden?

The start inhibitor makes sure the engine cannot be started with a gear engaged, because the car could then move off when it starts. The signal from the gear selector assembly tells the engine control module whether starting is allowed, and starting is allowed when the signal is low. The fault means the signal is too low even though the gear selector is in a position where starting should not be allowed.

Mulige årsaker

The signal cable is short-circuited to ground
Open circuit in the signal cable
Damaged connector or damaged cable

Hva du kan gjøre

1Read off the fault code, clear it and check whether it comes back
2Have a diagnostic tool? With the brake pressed, move the selector through P, R, N and D; start should show permitted only in P and N
3Check the connector and wire to the start inhibitor for loose contacts, oxidation and chafing; a multimeter can check for an open circuit or a short to ground
4If the fault remains, checking the transmission control module and the mechatronic unit is a workshop task, since the control module handles the start inhibitor signal

Symptomer du kan merke2

The engine starts with the gear selector in position R or D
The engine does not start, sometimes or always

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.