VOLVO
TCM-0075 - Function, Shift-lock. Signal missing
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
Hva betyr feilkoden?
The gear selector has an electrically controlled lock (shift-lock) that is meant to stop it being moved out of position P by accident. Although the code is named signal missing, it applies to a signal to the shift-lock solenoid that is too high. The fault means the lock is not controlled correctly.
Mulige årsaker
- The cable to the shift-lock solenoid is short-circuited to voltage
- Internal fault inside the transmission control unit (TCM)
- Internal fault inside the gear selector unit (GSM)
Hva du kan gjøre
- 1With the ignition on and the selector in N: try to move it without the brake (it should not move), then press the brake and try again (it should move)
- 2Read off the fault code, clear it and check whether it comes back
- 3Check the cable to the shift-lock solenoid for chafing and loose connections, and use a multimeter to check that it is not live
- 4Have a workshop check the connector at the transmission control module and the gear selector module; if no fault is found in the wiring, one of the modules may need replacing
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.