Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    TCM-0095
    VOLVO

    TCM-0095 - Gear selector lever control module communication. Signal too low

    System

    Girkassestyring (TCM)

    Volvo-modeller feilkoden gjelder for

    Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.

    Gjelder følgende modeller:

    4 modeller

    S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Vis modeller per årsmodell og motor (13)
    • Volvo S80 (1999–2006)1999–2004
    • Volvo S80 (1999–2006)2005–2006Alle girkasser unntatt: M56
    • Volvo V70 (2000–2008)2000–2002
    • Volvo V70 (2000–2008)2003Alle girkasser unntatt: M58
    • Volvo V70 (2000–2008)2004–2007Kun girkasse: AW50/51 AWD, AW55-50/51SN
    • Volvo V70 (2000–2008)2008Kun girkasse: AW55-50/51SN
    • Volvo V70 XC / XC70 (2001–2007)2001–2002
    • Volvo V70 XC / XC70 (2001–2007)2003–2007Kun girkasse: AW50/51 AWD
    • Volvo XC90 (2003–)2003, 2015
    • Volvo XC90 (2003–)2004Alle girkasser unntatt: M66 AWD
    • Volvo XC90 (2003–)2005–2006Alle girkasser unntatt: M66 AWD, TF-80SC AWD
    • Volvo XC90 (2003–)2007Kun girkasse: AW50/51 AWD, AW55-50/51SN
    • Volvo XC90 (2003–)2008–2014Kun girkasse: AW50/51 AWD

    Hva betyr feilkoden?

    The transmission control module receives a signal from the gear selector module (GSM) that is too low. The fault means the signal from the gear selector module is too low, so the gear position may be shown incorrectly or not at all on the panel.

    Mulige årsaker

    • Contact resistance in the connections
    • The communication line is shorted to ground

    Hva du kan gjøre

    1. 1Read off the fault code, clear it and check whether it comes back
    2. 2Check the connectors at both ends of the communication line for contact resistance and oxidation
    3. 3Press the brake, move the selector through the positions and compare the gear in the instrument panel with the display on the selector panel
    4. 4If only the instrument panel shows the gear, the circuit board in the top panel may need replacing; a workshop should decide whether the fault lies in other systems

    Symptomer du kan merke4

    • Malfunction indicator lamp (MIL) on
    • General orange warning lamp on
    • No gear position shown on the gear selector panel
    • General warning lamp on

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.