VOLVO
TCM-009B - Power supply. Signal too high
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
Hva betyr feilkoden?
The transmission control module monitors the power supply and compares it with a voltage value from the central electronic module (CEM). The fault means the voltage is too high for the control module's function to be guaranteed.
Mulige årsaker
- Battery voltage too low
- Contact resistance or oxidation in the connectors to the control module or the transmission
- A battery charger with the wrong voltage has been used
- Internal fault inside the transmission control unit (TCM)
Hva du kan gjøre
- 1Use a multimeter to measure the battery voltage with the engine running; it should be roughly the battery voltage
- 2Check that no battery charger is connected; if a charger with too high a voltage was used earlier, that may be the cause
- 3Check that the charging system does not give too high a charge
- 4Have a workshop check the connectors to the control module and the transmission and, if no fault is found, the control module
Symptomer du kan merke2
- Malfunction indicator lamp (MIL) on
- General warning lamp on
Hva feilen kan påvirke3
- The adaptation and lock-up function are blocked
- Slip lock-up is blocked
- The Emergency mode 1 program is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.