VOLVO
TCM-0101 - Shift solenoid S3. Signal too high
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
11 modellerC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S40 (1996–2004), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V40 (1996–2004), V70 (1997–2000), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C70 Cabriolet (1998–2005)2000–2005Kun girkasse: AW55-50/51SN
- Volvo C70 Coupé (1998–2002)2000–2002Kun girkasse: AW55-50/51SN
- Volvo S40 (1996–2004)2001–2004
- Volvo S60 (2001–2009)2001–2002
- Volvo S60 (2001–2009)2003Alle girkasser unntatt: M58
- Volvo S60 (2001–2009)2004–2009Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo S70 (1997–2000)2000Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo S80 (1999–2006)1999–2000Kun girkasse: AW55-50/51SN
- Volvo S80 (1999–2006)2001–2006Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V40 (1996–2004)2001–2004
- Volvo V70 (1997–2000)2000Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2000–2002
- Volvo V70 (2000–2008)2003Alle girkasser unntatt: M58
- Volvo V70 (2000–2008)2004–2007Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2008Kun girkasse: AW55-50/51SN
- Volvo V70 XC / XC70 (2001–2007)2001–2002
- Volvo V70 XC / XC70 (2001–2007)2003–2007Kun girkasse: AW50/51 AWD
- Volvo XC90 (2003–)2003Alle girkasser unntatt: 4T65 AWD
- Volvo XC90 (2003–)2004–2007Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo XC90 (2003–)2008–2014Kun girkasse: AW50/51 AWD
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The transmission control module drives shift solenoid S3, one of the solenoids that change gears. The fault means the signal in the circuit to solenoid S3 is too high.
Mulige årsaker
- Signal wire shorted to voltage
- Internal fault in the control module
Hva du kan gjøre
- 1Have a diagnostic tool? Read the oil temperature in live data before and after a road test; it should have risen. If it looks unrealistic, the temperature sensor may be at fault
- 2Have a diagnostic tool? With the selector in P, activate solenoid S3 and check that the status switches between OFF and ON
- 3Use a multimeter to check that the lead to solenoid S3 is not live, and check the connectors for oxidation and loose contacts
- 4Have a workshop check the solenoid and the control module; if no fault is found in the lead, the solenoid may need replacing
Symptomer du kan merke5
- General orange warning lamp on
- Malfunction indicator lamp (MIL) on
- Harsh gear shifting
- No gear changes
- No lock-up function
Hva feilen kan påvirke1
- The control module's Emergency mode I program is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.