VOLVO
TCM-0111 - Lock-up solenoid SLU. Faulty signal
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2001–2009)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC
- Volvo V70 (2000–2008)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Kun motor: D5244T5 · Kun girkasse: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5 · Alle girkasser unntatt: AW50/51 AWD
Hva betyr feilkoden?
The transmission control module (TCM) has registered that the measured current in the lock-up solenoid circuit is incorrect. The solenoid then cannot regulate the system pressure in the gearbox, which affects the lock-up function and gear changes.
Mulige årsaker
- Contact resistance in the connectors
- Open circuit in the control signal or signal ground wire
- Lock-up solenoid stuck
- Lock-up solenoid not working
Hva du kan gjøre
- 1Read and clear the fault code, road test and see whether it returns
- 2If you have a diagnostic tool: read the lock-up solenoid status in live data during a road test and see whether the value changes when lock-up engages
- 3If the value does not change, the solenoid may be stuck or defective, and a workshop should check it
- 4Have a workshop check the wiring and connectors to the gearbox control module for contact resistance and open circuits
- 5If the checks show no wiring fault, have a workshop decide whether the solenoid or the control system needs replacing
Symptomer du kan merke5
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Gear changes are harsh
- Gear changes do not occur
- Gears slip abnormally
Hva feilen kan påvirke1
- An auxiliary program in the gearbox control module is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.