VOLVO
TCM-0115 - Shift solenoid S3. Hydraulic fault
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
11 modellerC70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S40 (1996–2004), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V40 (1996–2004), V70 (1997–2000), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (21)
- Volvo C70 Cabriolet (1998–2005)2000–2005Kun girkasse: AW55-50/51SN
- Volvo C70 Coupé (1998–2002)2000–2002Kun girkasse: AW55-50/51SN
- Volvo S40 (1996–2004)2001–2004
- Volvo S60 (2001–2009)2001–2002
- Volvo S60 (2001–2009)2003Alle girkasser unntatt: M58
- Volvo S60 (2001–2009)2004–2009Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo S70 (1997–2000)2000Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo S80 (1999–2006)1999–2000Kun girkasse: AW55-50/51SN
- Volvo S80 (1999–2006)2001–2006Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V40 (1996–2004)2001–2004
- Volvo V70 (1997–2000)2000Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2000–2002
- Volvo V70 (2000–2008)2003Alle girkasser unntatt: M58
- Volvo V70 (2000–2008)2004–2007Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2008Kun girkasse: AW55-50/51SN
- Volvo V70 XC / XC70 (2001–2007)2001–2002
- Volvo V70 XC / XC70 (2001–2007)2003–2007Kun girkasse: AW50/51 AWD
- Volvo XC90 (2003–)2003Alle girkasser unntatt: 4T65 AWD
- Volvo XC90 (2003–)2004–2007Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo XC90 (2003–)2008–2014Kun girkasse: AW50/51 AWD
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
Shift solenoid S3 has a hydraulic fault, meaning the solenoid is stuck either open or closed. The solenoid cannot then control the gear change as it should. The fault can cause gear changes to fail or become harsh, and the car switches to an emergency program.
Mulige årsaker
- The solenoid is stuck, either open or closed
- Defective solenoid
Hva du kan gjøre
- 1Have a workshop check the transmission fluid level and quality, as the level depends on the oil temperature
- 2If you have a diagnostic tool: activate shift solenoid S3 and listen for a click from the gearbox
- 3If no click is heard, this indicates a mechanical fault in the solenoid, and a workshop should check it
- 4Have a workshop check the connectors on the gearbox and the control module for contact resistance and oxidation
- 5If metal particles are found in the control system, have a workshop decide whether the gearbox needs replacing
Symptomer du kan merke5
- The orange general warning lamp is lit
- Gear changes do not occur
- Harsh gear changes
- The lock-up function does not work
- The automatic transmission warning lamp is lit
Hva feilen kan påvirke3
- The control module emergency program Emergency mode II is activated
- The control module limp-home program Limp-home is activated
- The control module switches off activation of all solenoids, which is why gear changes do not occur
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.