VOLVO
TCM-0120 - Control unit. Internal fault
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerS40 (1996–2004), S60 (2001–2009), S80 (1999–2006), V40 (1996–2004), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (17)
- Volvo S40 (1996–2004)2001–2004
- Volvo S60 (2001–2009)2001–2002
- Volvo S60 (2001–2009)2003Alle girkasser unntatt: M58
- Volvo S60 (2001–2009)2004–2009Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo S80 (1999–2006)1999–2000Kun girkasse: AW55-50/51SN
- Volvo S80 (1999–2006)2001–2006Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V40 (1996–2004)2001–2004
- Volvo V70 (2000–2008)2000–2002
- Volvo V70 (2000–2008)2003Alle girkasser unntatt: M58
- Volvo V70 (2000–2008)2004–2007Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V70 (2000–2008)2008Kun girkasse: AW55-50/51SN
- Volvo V70 XC / XC70 (2001–2007)2001–2002
- Volvo V70 XC / XC70 (2001–2007)2003–2007Kun girkasse: AW50/51 AWD
- Volvo XC90 (2003–)2003Alle girkasser unntatt: 4T65 AWD
- Volvo XC90 (2003–)2004–2007Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo XC90 (2003–)2008–2014Kun girkasse: AW50/51 AWD
- Volvo XC90 (2003–)2015
Hva betyr feilkoden?
The control module has detected an internal fault in the output driver circuit that controls one of the solenoids in the gearbox. The fault lies in the control module, which can then cancel activation of the solenoids.
Mulige årsaker
- Internal fault inside the TCM
Hva du kan gjøre
- 1Clear the fault code and road test to see whether it comes back
- 2If you have a diagnostic tool: activate solenoid S3 and check that its status changes between off and on
- 3Have a workshop check the control module and, if needed, replace and program it, since a new control module must be programmed
- 4Do not replace other parts before a workshop has checked the control module
Symptomer du kan merke5
- The orange general warning lamp is lit
- The lock-up function does not work
- Harsh gear changes
- Gear changes do not occur
- The automatic transmission warning lamp flashes
Hva feilen kan påvirke2
- The transmission limp-home program Limp-home is activated
- System pressure is not reduced during gear changes and no torque limiting is requested from the engine control module
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.