VOLVO
TCM-013C - Linear pressure solenoid SLC2. Faulty signal
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2001–2009)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC
- Volvo V70 (2000–2008)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Kun motor: D5244T5 · Kun girkasse: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5 · Alle girkasser unntatt: AW50/51 AWD
Hva betyr feilkoden?
The control module has registered that the measured current in the circuit of solenoid SLC2 is incorrect, so SLC2 cannot regulate the system pressure. This can cause harsh gear changes, missed gear changes or slipping.
Mulige årsaker
- Contact resistance in the connectors
- Open circuit in the control signal or signal ground wire
- Linear pressure solenoid SLC2 stuck
- Linear pressure solenoid SLC2 not working
Hva du kan gjøre
- 1Read and clear the fault code, road test and see whether it returns
- 2If you have a diagnostic tool: read the SLC2 solenoid value in live data and see whether it changes when gears are engaged
- 3Use a multimeter to check that the wire to the solenoid is not broken
- 4If the value does not change, the fault is permanent and a workshop should check the solenoid
- 5Have a workshop check the connectors to the control module for contact resistance and oxidation
Symptomer du kan merke5
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Harsh gear changes
- Gear changes do not occur
- Gears slip abnormally
Hva feilen kan påvirke1
- An auxiliary program in the control module is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.