VOLVO
TCM-0141 - Linear pressure solenoid SLC3. Signal too low
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2001–2009)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC
- Volvo V70 (2000–2008)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Kun motor: D5244T5 · Kun girkasse: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5 · Alle girkasser unntatt: AW50/51 AWD
Hva betyr feilkoden?
Although the fault code is named too low signal, it concerns an open circuit in the circuit to linear pressure solenoid SLC3. The solenoid then cannot regulate the system pressure, which gives harsher gear changes and makes the lock-up function fail.
Mulige årsaker
- Contact resistance in the connectors
- Open circuit in the control signal or signal ground wire
- The solenoid does not function
- The TCM is not working
Hva du kan gjøre
- 1Read the fault code, clear it and road test the car
- 2If you have a diagnostic tool: read the SLC3 solenoid value in live data while driving and see whether it changes
- 3Check that the wiring and connectors from the gearbox are not chafed or loose
- 4Use a multimeter to check that the wire to the solenoid is not broken
- 5If the wiring checks out, have a workshop decide whether the control system should be replaced
Symptomer du kan merke4
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- The lock-up function does not work
- Harsh gear changes
Hva feilen kan påvirke1
- An auxiliary program in the control module is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.