VOLVO
TCM-0192 - Gear selector module (GSM). Faulty signal
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
Hva betyr feilkoden?
The hall sensor in the gear selector gives a faulty signal. The control module has registered that the gear-blocking solenoid is activated while the hall sensor is inactive, or that gear positions R, N and D are received while the sensor is active. This points to the sensor not working.
Mulige årsaker
- The hall sensor is not functioning
Hva du kan gjøre
- 1Clear the fault code and road test to see whether it returns
- 2If you have a diagnostic tool: read the gear-blocking status and the hall sensor status in live data as the selector leaves P, and see whether they agree
- 3Have a workshop check the hall sensor and replace the circuit board or the selector module if needed
- 4After the repair, a workshop should check that the gear block works when the brake is pressed and the selector leaves P
Symptomer du kan merke1
- The general warning lamp is lit
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.