VOLVO
TCM-0212 - Shift solenoid S3. Hydraulic fault
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
Hva betyr feilkoden?
Shift solenoid S3 has stuck in the ON position. The control module has noticed that the speed and engine speed signals do not match the expected values and that the wrong gear is engaged. This can affect gear changes, and the car then switches to an emergency program.
Mulige årsaker
- Shift solenoid S3 has mechanically stuck in the ON position
- The solenoid does not function
Hva du kan gjøre
- 1Have a workshop check the transmission fluid level and quality, as the level varies with the oil temperature
- 2If the oil smells burnt or there are metal particles on the dipstick, have a workshop decide whether the gearbox needs replacing
- 3If you have a diagnostic tool: activate S3 and listen for a click; if no click is heard, the solenoid has a mechanical fault
- 4Have a workshop inspect the control system for metal particles and dirt, and replace solenoid S3 if the system is clean
- 5After the repair, a workshop should reset the adaptation and the fluid quality counter
Symptomer du kan merke2
- The malfunction indicator lamp is lit
- The general warning lamp is lit
Hva feilen kan påvirke1
- The control module emergency program Emergency mode 2 is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.