VOLVO
TCM-0286 - Hall sensor in gear selector. Internal fault
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
Hva betyr feilkoden?
The gear position sensor in the transmission control module has registered that the main sensor signal is too high. The sensor receives the selector position through a cable, so the fault may be due to the sensor position (offset) needing adjustment or an internal fault in the control module. Gear changes may then become harsh and the car switches to an emergency program.
Mulige årsaker
- The gear position sensor position (offset) needs adjusting
- Internal fault inside the TCM
Hva du kan gjøre
- 1With a diagnostic tool, move the selector through all positions; an undefined reading in P, R, N or D means the cable needs checking
- 2Have a workshop check that the selector cable is correctly adjusted and calibrate the position sensor
- 3Clear the fault code and road test to see whether it returns
- 4If the code returns after calibration, have a workshop replace the transmission control module
Symptomer du kan merke3
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Harsh gear changes
Hva feilen kan påvirke1
- The control module emergency program Emergency mode 4 is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.