VOLVO
TCM-0287 - Hall sensor in the gear selector. Internal fault
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
Hva betyr feilkoden?
The main sensor in the gear position sensor has registered a value that is too low. The sensor in the transmission control module receives the selector position through a cable, and the fault is due either to the position needing adjustment or an internal fault in the control module. The car may then enter an emergency program with harsher gear changes.
Mulige årsaker
- The gear position sensor position (offset) needs adjusting
- Internal fault inside the TCM
Hva du kan gjøre
- 1Read the fault code and then clear it
- 2If you have a diagnostic tool: show the selector position in live data and compare it with the display as the lever is moved
- 3Have a workshop check the selector cable adjustment and calibrate the gear position sensor using the correct procedure
- 4If the code remains after calibration, have a workshop replace the transmission control module
Symptomer du kan merke3
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Harsh gear changes
Hva feilen kan påvirke1
- The control module emergency program Emergency mode 4 is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.