VOLVO
TCM-0291 - Hall sensor in the gear selector. Internal fault
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
Hva betyr feilkoden?
The auxiliary sensor in the gear position sensor has registered a value that is too high. The sensor in the transmission control module receives the selector position through a cable. The fault is due to the position needing adjustment or an internal fault in the control module, and it can cause harsh gear changes.
Mulige årsaker
- The gear position sensor position (offset) needs adjusting
- Internal fault inside the TCM
Hva du kan gjøre
- 1Have a workshop check that the selector cable is correctly adjusted before any part is replaced
- 2If you have a diagnostic tool: read the selector position in live data and see whether it follows the lever as it moves
- 3Clear the fault code and road test to see whether it returns
- 4If the code returns after calibration, have a workshop replace the transmission control module
Symptomer du kan merke3
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Harsh gear changes
Hva feilen kan påvirke1
- The control module emergency program Emergency Mode 4 is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.