VOLVO
TCM-0292 - Hall sensor in the gear selector. Internal fault
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (6)
- Volvo C30 (2007–2013)2007–2013Kun girkasse: AW55-50/51SN
- Volvo C70 (2006–2013)2006–2013Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo S40 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
- Volvo V50 (2004–2013)2004, 2011–2012Kun girkasse: AW55-50/51SN
- Volvo V50 (2004–2013)2005–2010Kun girkasse: AW50/51 AWD, AW55-50/51SN
Hva betyr feilkoden?
The auxiliary sensor in the gear position sensor has registered a value that is too low. The gear position sensor, which sits in the transmission control module, receives the selector position through a cable. The fault may be that the position needs adjusting or an internal fault in the control module, and it shows as harsh gear changes.
Mulige årsaker
- The gear position sensor position (offset) needs adjusting
- Internal fault inside the TCM
Hva du kan gjøre
- 1If you have a diagnostic tool: move the selector through every position and check whether live data shows an undefined reading when it sits in P, R, N or D
- 2Have a workshop adjust the selector cable and calibrate the gear position sensor
- 3Read and clear the fault code after calibration
- 4If the code remains after calibration, have a workshop replace the transmission control module
Symptomer du kan merke3
- The general warning lamp is lit
- The malfunction indicator lamp is lit
- Harsh gear changes
Hva feilen kan påvirke1
- The control module emergency program Emergency mode 4 is activated
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.