VOLVO
TCM-0293 - Gear selector hall sensor. Internal fault
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS60 (2001–2009), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2001–2009)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo S60 (2001–2009)2008–2009Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC
- Volvo V70 (2000–2008)2006–2007Kun motor: B5254T4, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo V70 (2000–2008)2008Kun motor: D5244T5 · Kun girkasse: TF-80SC
- Volvo V70 XC / XC70 (2001–2007)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2006–2007Kun motor: D5244T4 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2008–2010Kun motor: D5244T4, D5244T5 · Kun girkasse: TF-80SC AWD
- Volvo XC90 (2003–)2011Kun motor: D5244T18, D5244T4, D5244T5 · Kun girkasse: TF-80SC, TF-80SC AWD
- Volvo XC90 (2003–)2012Alle motorer unntatt: B5254T2, B6324S5 · Alle girkasser unntatt: AW50/51 AWD
Hva betyr feilkoden?
Hall sensor 2 in the gear position sensor gives a faulty signal to the transmission control module. The fault is due either to the gear position sensor being misadjusted or to an internal fault in the control module, and the engine may then not start.
Mulige årsaker
- Misadjusted gear position sensor
- Internal fault inside the TCM
Hva du kan gjøre
- 1If you have a diagnostic tool: move the selector through all positions and check that the position in live data matches the display
- 2Have a workshop check that the selector cable is correctly adjusted and adjust it if needed
- 3If there are other fault codes for the transmission, have a workshop deal with them first, as they must be traced before this one
- 4If the code remains after calibration, have a workshop replace the transmission control module
Symptomer du kan merke3
- The malfunction indicator lamp is lit
- The general warning lamp is lit
- The engine does not start
Hva feilen kan påvirke2
- Adaptation is blocked
- The control module uses the last selected gear position
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.