Hva betyr feilkode TCM-0411?

Diagnose og feilkodedefinisjon for TCM-0411 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C30 (2007–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-0411 - Position sensor shift fork 3. Signal to low

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (10)

Hva betyr feilkoden?

The transmission control module (TCM) receives too low a signal from the position sensor for shift fork 3. Because the signal shows the fork's position, the control module cannot read that position correctly. The cause can be in the cable, the sensor or the control module.

Mulige årsaker

Cable short-circuited to ground
Damaged position sensor
Damaged transmission control module (TCM)

Hva du kan gjøre

1Have a workshop with diagnostic equipment check the voltage supply to the position sensors; if it is outside the normal range, the fault is inside the control module
2Use a multimeter to check that the cable to the position sensor for shift fork 3 has no contact with ground (the car body)
3If you have diagnostic equipment, look at the position value for shift fork 3 in live data and see whether it changes when the gears are engaged
4If a value is outside or at the limit, a workshop should replace the mechatronic unit; if readings are within limits, the fault has probably been sporadic
5If the fault is inside the control module, it must be replaced, and a new module is delivered without software and must be programmed by a workshop

Symptomer du kan merke5

Check engine light comes on or behaves abnormally
Message with yellow warning symbol in the display
Shifts occur too early, too late or too often, sometimes or all the time
Gear changes take too long to complete, sometimes or all the time
No automatic gear changes

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.