Hva betyr feilkode TCM-0413?

Diagnose og feilkodedefinisjon for TCM-0413 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C30 (2007–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-0413 - Shift fork 3. Faulty signal

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (10)

Hva betyr feilkoden?

The signal from the position sensor for shift fork 3 changes too quickly, which the transmission control module (TCM) reacts to. The fault concerns that sensor, but the other fault codes present show whether the cause lies in the sensor or in the transmission.

Mulige årsaker

Damaged position sensor
Incorrect voltage supply to the sensor
Damaged transmission control module (TCM)

Hva du kan gjøre

1Read out the fault codes from the transmission control module again to see whether the fault is in the transmission or in the mechatronic unit
2With diagnostic equipment, look at the position value for shift fork 3 in live data and see whether it changes unevenly when the gears are engaged
3If fault code TCM-042C is set, the cause is outside the mechatronic unit and a workshop should replace the transmission
4If any sensor code TCM-0410, TCM-0411 or TCM-0415 is set but not TCM-042C, a workshop should replace the mechatronic unit
5If none of these codes is set, a workshop should check the input shaft speeds and the counter values to decide between a sensor and a mechanical fault

Symptomer du kan merke5

Check engine light comes on or behaves abnormally
Text window with yellow warning symbol and message
Gears shift hard or jerky, sometimes or all the time
Gears shift too early, too late or too often, sometimes or all the time
No automatic gear changes

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.