Hva betyr feilkode TCM-043A?

Diagnose og feilkodedefinisjon for TCM-043A (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C30 (2007–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-043A - Shift fork. Shift fork 2 requested but movment on shift fork 1

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (10)

Hva betyr feilkoden?

The transmission control module (TCM) has requested a movement of shift fork 2, but shift fork 1 moves instead. The cause lies in one of the solenoids that controls gear changes, and the fault means the mechatronic unit must be replaced.

Mulige årsaker

Damaged shift solenoid in the hydraulic control

Hva du kan gjøre

1Read out the fault codes from the transmission control module and deal first with any codes that may share the same cause
2The fault means the mechatronic unit must be replaced, and a workshop should do this
3If the control module is also replaced, it must be programmed by a workshop, because a replacement control module arrives without software
4Then read out the fault codes again to see whether the fault code remains

Symptomer du kan merke5

Check engine light comes on or behaves abnormally
Message with yellow warning symbol in the display
Gears shift hard or jerky, sometimes or all the time
No automatic gear changes
Shifts occur too early, too late or too often, sometimes or all the time

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.