Hva betyr feilkode TCM-0443?

Diagnose og feilkodedefinisjon for TCM-0443 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C30 (2007–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-0443 - Shift fork 3 or 4. Shift movement in opposit direktion than requested

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (10)

Hva betyr feilkoden?

Shift fork 3 or 4 travels the wrong way compared with the one the TCM has requested. The fault lies in the second hydraulic valve or in the control solenoid for the valves, and it means the mechatronic unit must be replaced.

Mulige årsaker

Damaged second hydraulic valve
Damaged control solenoid for the hydraulic valves

Hva du kan gjøre

1Read out the fault codes from the transmission control module and deal first with any codes that may share the same cause
2The fault means the mechatronic unit must be replaced, and a workshop should do this
3If the control module is also replaced, it must be programmed by a workshop, because a replacement control module arrives without software
4Then read out the fault codes again to see whether the fault code remains

Symptomer du kan merke5

Check engine light comes on or behaves abnormally
Text window with yellow warning symbol and message
Shifts occur too early, too late or too often, sometimes or all the time
Gear changes take too long to complete, sometimes or all the time
Gears shift hard or jerky, sometimes or all the time

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.