Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    TCM-0466
    VOLVO

    TCM-0466 - Clutch filling pressure. Adapted pressure outside allowed range

    System

    Girkassestyring (TCM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Vis modeller per årsmodell og motor (10)
    • Volvo C30 (2007–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
    • Volvo C30 (2007–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
    • Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3 · Kun girkasse: MPS6
    • Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MPS6
    • Volvo S40 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
    • Volvo S40 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
    • Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
    • Volvo V50 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
    • Volvo V50 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
    • Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6

    Hva betyr feilkoden?

    The transmission control module (TCM) has found that the adapted filling pressure for one of the clutches is outside the permitted range. The transmission has two clutches, clutch 1 for odd gears and clutch 2 for even gears. The time taken to fill and drain the preparatory pressure must stay within a tolerance.

    Mulige årsaker

    • Leak in the hydraulic system
    • Dirt in the hydraulic system
    • Damaged clutch unit

    Hva du kan gjøre

    1. 1Read out the fault codes from the transmission control module. If fault codes for the solenoids are stored, a workshop should replace the mechatronic unit
    2. 2Look for oil traces or signs of a leak under the transmission, since a leak or dirt in the hydraulic system can give the wrong pressure
    3. 3If the fault remains after the mechatronic unit has been replaced, the transmission must be replaced, and a workshop should do this
    4. 4The clutch unit may be damaged and then needs to be replaced by a workshop

    Symptomer du kan merke2

    • Gear changes take too long to complete, sometimes or all the time
    • Shifts occur too early, too late or too often, sometimes or all the time

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.