Hva betyr feilkode TCM-0472?

Diagnose og feilkodedefinisjon for TCM-0472 (Volvo C30 (2007–2013), Volvo C30 (2007–2013), Volvo C30 (2007–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

TCM-0472 - Inputshaft speed odd gears. Faulty signal

System

Girkassestyring (TCM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

4 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

Vis modeller per årsmodell og motor (10)

Hva betyr feilkoden?

The input shaft speed sensor for odd gears gives a value that does not match the other speed values in the transmission. The sensor is also used to check the other two speed sensors, so the fault can affect how the gears are monitored.

Mulige årsaker

Damaged sensor

Hva du kan gjøre

1Read out the fault codes from the transmission control module. If several speed sensors show faults, the cause may instead lie in the control module
2If you have diagnostic equipment, compare the input shaft speed for odd gears with the other speed values in live data while the car is rolling and see whether it deviates
3Check the connector at the sensor for the odd gears: see whether it is secure, clean and free from damage
4If the fault is inside the control module, it must be replaced; a new module is delivered without software and must be programmed by a workshop

Symptomer du kan merke5

Yellow warning symbol and message in the display
No forward or reverse movement with a gear selected
Gears shift hard or jerky, sometimes or all the time
Gear changes take too long to complete, sometimes or all the time
Shifts occur too early, too late or too often, sometimes or all the time

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.