VOLVO
TCM-0489 - Pressure sensor clutch even gears. Signal too low
System
Girkassestyring (TCM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (10)
- Volvo C30 (2007–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo C30 (2007–2013)2011–2013Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo C70 (2006–2013)2009–2010Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo S40 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2008Kun motor: D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2009–2010Kun motor: B4204S3, D4204T · Kun girkasse: MPS6
- Volvo V50 (2004–2013)2011–2012Kun motor: B4204S3 · Kun girkasse: MPS6
Hva betyr feilkoden?
The pressure sensor for the clutch for even gears gives too low a signal to the transmission control module (TCM). Because the signal shows the clutch pressure, the control module cannot read it correctly. The fault may come from a sensor wire short-circuited to ground or from a damaged sensor.
Mulige årsaker
- Pressure sensor short-circuited to ground
- Pressure sensor for the clutch for even gears is damaged
Hva du kan gjøre
- 1Read out the fault codes from the transmission control module and deal first with any codes that may share the same cause
- 2Use a multimeter to check that the wire to the pressure sensor for even gears has no contact with ground (the car body)
- 3The fault points to a damaged pressure sensor or a fault at its connection; the mechatronic unit must then be replaced, which a workshop should do
- 4If the fault is inside the control module, it must be replaced, and a new module is delivered without software and must be programmed by a workshop
Symptomer du kan merke5
- Text window with yellow warning symbol and message
- Gears shift hard or jerky, sometimes or all the time
- No automatic gear changes
- Gear changes take too long to complete, sometimes or all the time
- Shifts occur too early, too late or too often, sometimes or all the time
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.